How to Set Up Your J-Tech Digital JTD-MINI-1x2SP (JTD-164) 4K 60Hz 1x2 HDMI Splitter
Product Link:
https://www.jtechdigital.com/products/hdmi-splitter-4k-60hz-4-2-0-1x2-hdmi-splitter
About The Product:
J-Tech Digital's JTD-MINI-1x2SP 4K splitter allows you to take an audio/video signal from 1 source device, and distribute that to 2 displays. Supports up to 4K 60Hz 4:2:0 resolution, and backwards compatible with 1080P, 720P etc. Perfect for using with Blu-Ray players, Gaming Consoles, Desktop and Laptops. Easily integrate this unit within your setup whether it's a residential or commercial environment.
- Distribute 1 HDMI source to 2 displays: Connect 1 HDMI source device to the input of the splitter, and distribute that signal to 2 displays simultaneously
- Enjoy 4K Resolution Across Both Outputs: Works with resolutions up to 4K@60Hz and 4:2:0 chroma color subsampling
- Wide Variety of Audio Formats Supported: Enjoy HD audio formats including Dolby Digital, Dolby TrueHD, DTS, DTS-HD Master Audio
- Backwards Compatible with Lower Resolutions: Working with 1080P and not 4K? Not an issue. This splitter is backwards compatible with non-4k source devices and displays, including 1080P/1080i, 720P/720i/ 480P/480i
What’s in the Box
- JTD-MINI-1x2SP 4K HDMI Splitter
- 5V USB Power Cable
- User Manual
What’s Needed for Setup
- 1 x JTD-MINI-1x2SP HDMI Splitter
- 1 x HDMI Source (Blu-ray player, game console, streaming device, PC, etc.)
- 2 x HDMI Display Devices (TVs, monitors, or projectors)
- 3 x HDMI Cables (1 for input, 2 for outputs)
Installation Steps
-
Connect the Source
Plug your HDMI source device into the HDMI input port on the splitter. -
Connect the Displays
Connect HDMI cables from each HDMI output port on the splitter to your two displays. -
Power the Splitter
Connect the included 5V power adapter to the splitter and plug it into a power outlet.. -
Turn On Devices
Power on your source device and displays. Both displays should now show the same video and audio signal.
Troubleshooting Tips
No Signal on One or Both Displays:
- Ensure HDMI cables are firmly connected.
- Check that displays are set to the correct HDMI input.
- Test with shorter or high-speed HDMI cables for 4K resolution.
Resolution Problems:
- If one display is lower resolution (e.g., 1080P), the splitter may output the lower resolution signal for compatibility.
- Confirm your source device is outputting a supported resolution (up to 4K@60Hz, YUV 4:2:0).
Audio Issues:
- Confirm your source device is set to output supported formats (Dolby Digital, DTS, etc.).
- If no audio, set source audio output to PCM or Stereo.
Power Issues:
Verify the power adapter is securely connected and the splitter’s power light is on.
Call our team at (888) 610-2818 or email us at sales@jtechdigital.com or support@jtechdigital.com for more information!
